Phonak target 3.1

That's very old, maybe ArgosyTarget3_3_1 would suffice?
 
piljke said:
Thank you, but i need 3.1 because i have phonak naida q30 SP
Click to expand...
I don't think so. I think you need the latest Phonak Target 10.1.2.
Here's a clip from a DIY School Legacy Hearing Aids (v2,2) PDF File named (Choose Hardware-Programming Device for Phonak);

• Legend: NW = Noahlink Wireless/Caution: Noah, NOAHlink & Noahlink Wireless are 3 different things
• Legend: HP = (Hi Pro or mini Pro) with Phonak/Unitron cs44-a cables and also maybe flexstrips or adapters

• 2012-Q3 Audéo Q-312T RIC = iCube II
• 2012-Q3 Audéo Q-312 RIC = iCube II
• 2012-Q3 Audéo Q-10 RIC= iCube II
• 2012-Q3 Bolero Q-M312 BTE = iCube II, or HP
• 2012-Q3 Bolero Q-M13 BTE = iCube II, or HP
• 2012-Q3 Bolero Q-P BTE = iCube II, or HP
• 2012-Q3 Bolero Q-SP BTE = iCube II, or HP
• 2012-Q3 Naída Q-RIC = iCube II, or HP
• 2012-Q3 Naída Q-SP BTE = iCube II, or HP
• 2012-Q3 Naída Q-UP BTE = iCube II, or HP
• 2012-Q3 Sky Q-RIC = iCube II, or HP
• 2012-Q3 Sky Q-M BTE = iCube II, or HP
• 2012-Q3 Sky Q-SP BTE = iCube II, or HP
• 2012-Q3 Sky Q-UP BTE = iCube II, or HP
 
You can use target 10.1.2. Naida Q is supported with the current version. You'll need iCube II or HI-PRO for programming, Noahlink Wireless is not supported by these hearing aids. If you use HI-PRO make sure to use cables CS44a for Phonak; they are not the same that cables CS44 for Siemens, Signia...
 
Back
Top