Brazilian Audibel

[Querofazertestee]

Please, i need brazilian Audibel fitting software

 

[pvc]

There is no Audibel fitting software, (Brazilian or otherwise). However, you can run Starkey fitting software as Multi-Brand and in doing so, it can be used to fit multiple brands in addition to Starkey branded hearing aids.

However, there are two versions (Legacy and Newer) of Starkey fitting software, so let's start there;

• Starkey Inspire X for Legacy model hearing aids
• Starkey Pro Fit for Newer/Current model hearing aids

Also, you don't run the Starkey fitting software itself. Instead you must run the Starkey PatientBase, and then Starkey PatientBase will allow you to choose between;

• Starkey Inspire X for Legacy model hearing aids
• Starkey Pro Fit for Newer/Current model hearing aids

SO, Which Audibel hearing aid model are you trying to fit? Legacy? Newer/Current? Both?

For reference; here's a clip from a DIY School Hearing Aids (v2.2) PDF File named (Unlocking ReBranded Hearing Aids); The file is organized by manufacturer so you will need to scroll down to the Starkey section near the end to find...

Starkey ReBranded Models:​

Both the New Starkey Pro Fit and Legacy Starkey Inspire can be used for Starkey's multi-branded products. The ReBranded names are listed below. Note that it is rather simple to run the Starkey fitting software with a "launch" parameter for both Starkey Inspire X for Legacy for hearing aids, or Starkey Starkey Pro Fit for newer/current hearing aids. However, Windows security will make it cumbersome for you to do so! Though, it's not extremely difficult! You must run a special version of Starkey Inspire for this to work. Below are the (3 steps) to run (Starkey Inspire or ProFit) for a multi-branded product:

Install software with a specific version of PatientBase, a specific version of Inspire, and whatever is the latest version of Starkey Starkey Pro Fit;

• PatientBase 27.0.10001.0
• Starkey InspireSetup 27.0.10016.0 (aka older-v27.0 for Legacy hearing aids and for Multi-Brand)
• Starkey ProFitSetup 2024.1 (or latest) for newer/current hearing aids

After installing the required modules; follow these 3 steps to run multi-brand.
Step 1: Right-click the Windows Start button and select Run, or press (Win-Key + R)
STEP 2: Enter the fitting software to be run (Inspire or ProFit), "exactly" as follows from one of the two lists below and into the Windows Run Command: Tip: Use the cut-and-paste method. Typing is too cumbersome;
Step3: Click OK

 

[Querofazertestee]

There is no Audibel fitting software, (Brazilian or otherwise). However, you can run Starkey fitting software as Multi-Brand and in doing so, it can be used to fit multiple brands in addition to Starkey branded hearing aids.

However, there are two versions (Legacy and Newer) of Starkey fitting software, so let's start there;

• Starkey Inspire X for Legacy model hearing aids
• Starkey Pro Fit for Newer/Current model hearing aids

Also, you don't run the Starkey fitting software itself. Instead you must run the Starkey PatientBase, and then Starkey PatientBase will allow you to choose between;

• Starkey Inspire X for Legacy model hearing aids
• Starkey Pro Fit for Newer/Current model hearing aids

SO, Which Audibel hearing aid model are you trying to fit? Legacy? Newer/Current? Both?

For reference; here's a clip from a DIY School Hearing Aids (v2.2) PDF File named (Unlocking ReBranded Hearing Aids); The file is organized by manufacturer so you will need to scroll down to the Starkey section near the end to find...

Starkey ReBranded Models:​

Both the New Starkey Pro Fit and Legacy Starkey Inspire can be used for Starkey's multi-branded products. The ReBranded names are listed below. Note that it is rather simple to run the Starkey fitting software with a "launch" parameter for both Starkey Inspire X for Legacy for hearing aids, or Starkey Starkey Pro Fit for newer/current hearing aids. However, Windows security will make it cumbersome for you to do so! Though, it's not extremely difficult! You must run a special version of Starkey Inspire for this to work. Below are the (3 steps) to run (Starkey Inspire or ProFit) for a multi-branded product:

Install software with a specific version of PatientBase, a specific version of Inspire, and whatever is the latest version of Starkey Starkey Pro Fit;

• PatientBase 27.0.10001.0
• Starkey InspireSetup 27.0.10016.0 (aka older-v27.0 for Legacy hearing aids and for Multi-Brand)
• Starkey ProFitSetup 2024.1 (or latest) for newer/current hearing aids

After installing the required modules; follow these 3 steps to run multi-brand.
Step 1: Right-click the Windows Start button and select Run, or press (Win-Key + R)
STEP 2: Enter the fitting software to be run (Inspire or ProFit), "exactly" as follows from one of the two lists below and into the Windows Run Command: Tip: Use the cut-and-paste method. Typing is too cumbersome;
Step3: Click OK

 

[pvc]

SO, Which Audibel hearing aid model are you trying to fit? Legacy? Newer/Current? Both?

Which model Audibel? And are you prepared to follow the meticulous instructions for Multi-Brand Starkey hearing aids?