Danalogic 6 hearing aids

A

aud.aqeel

New Member
Joined
Apr 6, 2024
Messages
20
Reaction score
3
Hi,
I have these Danalogic 6 hearing aids that I want to program. I tried detecting them in Aventa 2.95 and Danalogic 1.18 but am unable to get them programmed. Should I use Danafit? Please guide me and also provide me the link to download the relevant software .
Many thanks,
Aqeel
 

Attachments

  • PXL_20250721_065615713.jpg
    PXL_20250721_065615713.jpg
    140 KB · Views: 2
  • PXL_20250721_065628870.jpg
    PXL_20250721_065628870.jpg
    110.9 KB · Views: 2
This seems to be a ReBranded (GN Resound Danalogic 6 6070-DVI) model.
Here's a link to the → GN Resound Danalogic 6 6070-DVI User Manual
Tip: You can Click the Next-Page arrows to read the manual.

I don't know what software is used to program this model? If you find out then let us know. ;)
Here's a clip from a DIY School Hearing Aids (v2.2) PDF File named (Unlocking ReBranded Hearing Aids);

Danafit 1.5 is an older version of GN ReSound's software for ReBranded danalogic models (Gala, Aio, Tera, EOS, Logar, SAP).
Danafit 4.3 is an older version of GN ReSound's software for ReBranded danalogic models (won’t run on Win 11 and unknown models at this time).
BHM-Fit2 is an older version of GN ReSound's software for ReBranded models (AN-Evo1, contact star evo1, contact mini, apollon)
BHM-FitContactStarEvo1 is an older version of GN ReSound's software for ReBranded models (maybe contact star evo1?)
CompuFIT4 is an older version of GN ReSound's software for ReBranded Interton models (BIONIC, EVO, FINESSE, IQ, STARIS, Shape, Silflex)
ReSource II is an older version of GN ReSound's software for unknown ReBranded models and it requires Noah to install.

Tip: To avoid fuzzy photos for Close-Up/Macro photography; Capture the photo using direct-sunlight!!
 
Dear pvc.
thanks for your reply. So which programming software should i use to program these?
 
Back
Top