NOAH Wireless CDP-1 connection error in SmartFit

[Avincenty]

I am trying to use a CPD-1 device to try to fit new Jabra Enhanded Pro30 hearing aids. The Smatfit detects the hearing aids and I can select them. When I hit continue it tries to connect but then always shows an connection error. Any ideas if the CPD-1 is no longer supported? I have tried all firmwares to no avail, all give the same error. I am on 2.24 now.

Thanks

 

[pvc]

The DIY School Hearing Aids (v2.2) access portals are at your finger tips via 24/7 cloud storage access.

• Start here → DIY School Hearing Aids (v2.2) to find the access portals
• You can easily find the Access Portals again/anytime, by clicking any PVC Avatar (click twice - counting the 2nd popup Avatar)
• When logged in, you can find the Access Portals again/anytime, by clicking a Link in my Signature
• And finally, you can perform a simple Internet search for "DIY School Hearing Aids"

And here's a clip from a DIY School Hearing Aids (v2.2) PDF File named (02 How to Program your Hearing Aids);

Self Programming Don’ts:​

When installing hearing aid fitting software don’t choose the option to participate in the improve software feature. No need to have extra automatic communication with manufacturer!!

Don’t use the Noah system software (currently Noah4 or Noah-ES). Noah system software is never required for any manufacturer’s fitting software. Professional Audiologists need the Noah system software to group many clients into a one Noah database and provide automatic startup interfaces for the different manufacturer’s fitting software. If you are a self-programmer, it is simpler and cheaper to run the manufacturer’s fitting software standalone. When fitting software is run standalone it will use its own database. Repeat,,, Do not use the Noah System software!

Don’t confuse the above Noah system software (currently Noah4 or Noah-ES) with the Noahlink Wireless programming device. Don’t confuse an old obsolete programming device named NOAHlink with the Noahlink Wireless programming device. Noah, NOAHlink, and Noahlink Wireless are three different things.

 

[pvc]

When I hit continue it tries to connect but then always shows an connection error. Any ideas if the CPD-1 is no longer supported? I have tried all firmwares to no avail, all give the same error. I am on 2.24 now.

What Connection error does it show?
If you mean Noahlink Wireless when you say CPD-1, Yes it is still supported.
Suggested reading; DIY School Hearing Aids (v2.2) PDF File named (Noahlink Wireless 2 - DIY User Guide);

 

[Avincenty]

I get the software to detect the hearing aids, when I hit continue it allways gives a connection error.

I think this is related, but it happens still with 2.25 on Noah Wireless, I think my CPD-1 is the original version.

Noahlink Wireless firmware version 2.25 released to address issue of NLW losing connection with computer​

This release is to address reports that the Noahlink Wireless would in some cases not be detected. It would take unplugging and replugging of the NLW to establish a connection. Once the connection is established the NLW works as expected.
This issue and the firmware v 2.25 upgrade are for the original Noahlink Wireless.
Please note that the Noahlink Wireless firmware upgrader now supports both Noahlink Wireless and Noahlink Wireless 2. The upgrader will detect NLW devices connected, and offer the firmware upgrade if a newer firmware is available.

 

[pvc]

Okay, I think you are saying that your problem has been solved.