Phonak Target software link

mikey said:
I have a set of hearing aids I got from ebay they were cheaper but quickly quit working found out that they were loners. Will the software help me to get them up and running thanks for any help
Click to expand...
By loaners, Do you mean "Trial Hearing Aids"? Some Unitron Trial hearing aids can be reset after the hearing aids start beeping to signal that the trial has expired. But that's the only reset that I know of?

Read your PM/Private Message/Conversation for info on how to find Phonak Target 10.1.2.
 
pvc said:
Ciao Ken; per favore leggi il tuo messaggio privato/conversazione per sapere come trovare Phonak Target 10.0.0
Click to expand...
Salve protei gentilmente avere il software phonak target? Grazie mille
 
rambo said:
Salve protei gentilmente avere il software phonak target? Grazie mille
Click to expand...
Read your PM/Private Message/Conversation for info on how to find Phonak Target 10.1.2.
 
Salve a tutti chiedo gentilmente se qualcuno può inviarmi il software phonak target perché vorrei configurare da solo il mio apparecchio acustico grazie mille
 
Potrebbe esserci anche un manuale dei driver del noahlink? E se c'è anche un software per gli apparecchi starkey? Grazie mille scusate se molte domande ma sono nuovo grazie saluti
 
The PDFs are one-click access for you.
Repeat from conversation;
The DIY School Hearing Aids (v2.2) access portals are at your finger tips via 24/7 cloud storage access.
  • Start here → DIY School Hearing Aids (v2.2) to find the access portals
  • You can easily find the Access Portals again/anytime, by clicking any PVC Avatar (click twice - counting the 2nd popup Avatar)
  • When logged in, you can find the Access Portals again/anytime, by clicking a Link in my Signature
  • And finally, you can perform a simple Internet search for "DIY School Hearing Aids"
 
Buongiorno e grazie mille come sempre posso anche avere il software per l apparecchi starkey Livio 1200? Grazie mille
 
rambo said:
Potrebbe esserci anche un manuale dei driver del noahlink? E se c'è anche un software per gli apparecchi starkey? Grazie mille scusate se molte domande ma sono nuovo grazie saluti
Click to expand...
rambo said:
Buongiorno e grazie mille come sempre posso anche avere il software per l apparecchi starkey Livio 1200? Grazie mille
Click to expand...
If you install the fitting software first (before plugging-in Noahlink Wireless) to a USB port then this action will install a Noahlink Wireless driver.

Also, read your PM/Private Message/Conversation for info on how to find Starkey Inspire and PatientBase.
 
Read a DIY School Hearing Aids (v2.2) PDF File named (01 Free Hearing Aid Fitting Software) and scroll down to the Starkey section. Here's a clip;

Important: To run the Starkey software, you must run PatientBase, not the software itself! The first time you run PatientBase, you will be asked to specify a username and password. Choose an easy-to-remember username and password and keep it in mind or you will be locked out of PatientBase!

There are three software components. PatientBase is required, and then optionally, choose to install one or both of the fitting software components depending on your needs.
  • PatientBase (client database)
  • Starkey Inspire X (for Legacy hearing aids) is hidden
  • Starkey ProFit (for newer/current hearing aids) is hidden
 
Ok grazie mille questi software poi li trovo dopo aver scaricato e istallato PatientBase? Cmq ho installato gli altri software prima del noahlink wireless , poi una volta collegato al pc non c'è quindi bisogno di istallare nessun driver giusto? La protesi quando collego il noahlink e apro il programma la riconosce subito? Grazie mille
 
Ma poi cosa devo aprire per la regolazione della protesi? Solo PatientBase? Grazie
 
RE: Ok, thank you very much. Can I find this software after downloading and installing PatientBase? Anyway, I installed the other software before the NoahLink Wireless, so once I connect it to the PC, there's no need to install any drivers, right? Does the prosthesis recognize it immediately when I connect the NoahLink and open the program? Thank you very much.

No, Run the fitting software and then Connect to your hearing aids using whichever hearing aid programming device you have specified.
 
RE: But what do I have to open to adjust the prosthesis? PatientBase only? Thanks.
pvc said:
Read a DIY School Hearing Aids (v2.2) PDF File named (01 Free Hearing Aid Fitting Software) and scroll down to the Starkey section.
Click to expand...
 
RE: But for the Starkey Livio 1200 which of the two software should I download?
Here's a clip from a DIY School Legacy Hearing Aids (v2.2) PDF File named (Choose Hardware-Programming Device for Starkey) and scroll down to the Starkey section; Here's a Clip;
  • Legend: NW = Noahlink Wireless/Caution: Noah, NOAHlink & Noahlink Wireless are 3 different things
  • Legend: HP = (Hi Pro or mini Pro) with cables and also maybe flexstrips or adapters
  • Legend: SL = SurfLink Wireless
  • Legend: TL =TruLink Wireless

  • See this Cable Guide as reference for Genesis/Evolv models.
  • 2021-Q3 Evolv AI RIC R = NW or TL
  • 2021-Q3 Evolv AI RIC 312 = NW or TL
  • 2021-Q3 Evolv AI Micro RIC 312 = NW or TL
  • 2021-Q3 Evolv AI BTE R = NW or TL
  • 2021-Q3 Evolv AI BTE 13 = NW or TL
  • 2021-Q3 Evolv AI BTE 13 PP = NW
  • 2021-Q3 Evolv AI Custom 2.4 GHz = NW or TL
  • 2021-Q3 Evolv AI Custom = HP + Orange Flex Strip
  • See this Cable Guide as reference for (Livio Edge AI or Livio AI, Livio, Halo iQ, Muse iQ, SoundLens, Synergy iQ)
  • 2020-Q1 (Livio Edge AI or Livio AI or Livio) RIC R = NW or TL
  • 2020-Q1 ( (Livio Edge AI or Livio AI or Livio) RIC 312 = NW or TL
  • 2020-Q1 ( (Livio Edge AI or Livio AI or Livio) Micro RIC 312 = NW or TL
  • 2020-Q1 ( (Livio Edge AI or Livio AI or Livio) BTE R = NW or TL
  • 2020-Q1 ( (Livio Edge AI or Livio AI or Livio) BTE 13 = NW or TL
  • 2020-Q1 ( (Livio Edge AI or Livio AI or Livio) Custom 2.4 GHz = NW or TL
  • 2020-Q1 ( (Livio Edge AI or Livio AI or Livio) Custom R = NW or TL
  • 2020-Q1 (Picasso Custom* = SL , (i* = Wireless models, denoted with “i” in the technology tier)
  • 2020-Q1 (Picasso Custom = HP + Orange Flex Strip
  • 2020-Q1 (Halo iQ RIC 13 = NW or TL or HP with Starkey cables (straight)
  • 2017-Q1 Halo iQ RIC 312 = NW or TL or HP with Starkey cables (straight)
  • 2017-Q1 Muse iQ RIC R = SL
  • 2017-Q1 Muse iQ RIC 312 = SL or HP with Starkey cables (straight)
  • 2017-Q1 Muse iQ Micro RIC 312 = SL or HP with Starkey cables (straight)
 
rambo said:
Ma per lo starkey Livio 1200 quale software dovrei scaricare dei due
Click to expand...
Why am I doing all the Grunt work, ¯\_(ツ)_/¯

One of us has to use Translate. And since the majority of forum members speak/read English, I think that you should be doing the Translation/Posting in English. :)
 
Back
Top