Search results

I agree with @pvc : this is a GN Resound device. Connexx is for Signia devices. Connexx cannot be used to program your devices. I believe Amplifon devices are locked - this means you cannot program them yourself unless you get a PIN code from Amplifon. I checked the DIY School PDF doc and it...

I recently got A Widex SmartRIC 440 (I got them for $500 with new receivers @ eBay) and I've used the high-frequency boost option when I set them up and it made my setup much easier! (I have ski-slope hearing loss). The Widex fitting formula sets gains at 6kHz and 8kHz "low" for high frequency...

I switched from the OticonBass 2 vent to the Oticon OpenBass, it has a more open feeling but performs like the Bass domes. Glad my post was able to help! I never went back to the Phonak domes.

After playing a lot with my fitting software and doing research, I've learned that formulas are starting points. For me, DSL was the closest to what I wanted and the one that performed better with the Mimi app (I still had to do adjustments ). So yes, try all of them and choose your preferred...

I just found out that I was doing things wrong. I take back what I said. I can control the streaming volume from the iPhone as if I was controlling This is what I've been playing with, and I can't get the volume significantly up without distorting the sound, and my freq < 1K are already to the...

-- comment removed by author

I recently got a Rexton Reach, and I detest its streaming feature. WIth Phonak's HA, this is something extremely simple to do. Short answer: NO Long answer: While you are streaming, open the app and use the Rexton Assistant. There is an option that says "sounds are too soft," and the assistant...

It doesn't appear on the list of supported devices in Phonak target

I also don't understand the charts :-(

The sennheiser sonite R (Costco) is not OTC, has anyone seen the fitting software ? (I don't have these HA, but I am curious)

I can run Phonak Target & Connexx fitting (Rexton) in Parallels desktop on my MacBook Pro M1. There are a couple of issues that I had 1.- Neither the Phonak target nor the Connexx fitting connected to Noaklink Wireless. Running the Noahlink Wireless firmware updater (which seems to wake up the...

I've had the same problem. Check that the iPad has no other active Bluetooth connections and try to delete the Bluetooth connection and re-create it. Sometimes turning the BT on/off helps. Rebooting the HA also works. Phonak uses standard Bluetooth connections, and the troubleshooting steps are...

The Phonak infinio has a feature called "SoundRelax" that can be adjusted for the problem you mentioned. This feature reduces sudden loud sounds as slamming doors or clattering dishes (I copied this description from the Phonak software). This can be done by your audiologist or, as others have...

I had the same problem, not with UTM but with Parallels Desktop and the Phonak Target SW. The solution (in Parallels Desktop) is to run the Noahlink Wireless firmware update before starting the Phonak Target. You can do this in two ways: 1.- Start Phonak Target ->Trial & Tools -> Firmware...

Hello: Can you share with me the link for the Connexx software? I should be getting my new Rexton Reach soon! I got my Noahlink wireless 2 from Aliexpress for $120, the best price I've found. I've been using them with my Phonak HAs and it works great. Thanks!

I have a pair of old Oticon Ria2 Pros and have researched this. It's not worth it. Buying a pair of used HA that can be programmed wirelessly is cheaper. I asked my audiologist, and she said no way. I think the Oticon OPS S1 can be programmed wirelessly, and you can find them for less than $200...

Phonak Target 10 can run on Parallels (ARM): Sometimes, the SW does not recognize the Noahlink device - unplugging and plugging it fixes the issue

I had not seen the performance table, that gives me a better idea of the differences. Thanks for sharing it. I'm still not finding many reviews on non-sphere infinios... almost all the comments, reviews are for the Sphere. I'll check the links you shared. SO far what I have is working for me :-)

The problem with this document, as I mentioned before , is that there is plenty of technical jargon and I have no clue , from the customer point of view , if those additional features are worth thousand of $$ more that will benefit me . Yes , I see that “tap to answer” or “use Siri” but what...

Hello: Hi everyone, I’m new to the forum. I recently got the Phonak Infinio I30R hearing aids to replace my rarely used Oticon Ria2 Pro. I’ve been searching online reviews but can’t find any about the I30R. All the information I find is about the Spheres, not the I30, 50, 70, or 90 Infinio...